Thermal Tec | Roofing Testimonials

Thermal-Tec installed the MR Multi Ply Roofing System at our Chicago Bridge & Iron facility in Plainfield, IL in 2002.  They provided an outstanding roof system with leak free results.  Their safety procedures went above and beyond what other companies were offering.

We did not have to worry about interruption to our operation before, during or after the installation.  I would not hesitate to discuss my encounter with Thermal-Tec with any of my fellow colleagues in the Chicago Bridge & Iron family.  I can be reached at 815-439-6000.

Sincerely,

Bill Guntorius/Maintenance Supervisor

Thermal-Tec installed their MR Multi-ply system at our facility on two roofs;  Raw Material Building (2009) and Engineering Office Building (2010).  Both buildings had nuerous leaks and the built up roofs were in extremely poor condition.  They provided an outstanding roof system, which has exceeded our expectations.  No interruptions to our operations were experienced during installation.  Their crews worked well with our personnel.

Thermal-Tec’s safety program fulfilled all the requirements of our comprehensive safety program, with no issues or violations while on site.  I would strongly recommend Thermal-Tec to anyone needing a professional, safety oriented roofing company.

Sincerely,

Jim Kabitzke/Olin Brass

"We selected Thermal-Tec to perform roof work at our Nucor Steel in Birmingham, Al in 2007 and 2008. Thermal-Tec met and exceeded our on-site safety requirements. Work was preformed on highly sensitive areas in the plant and there were no complaints or concerns for safety during the time their personnel were on site. We consider Thermal-Tec a strong candidate for our future roofing needs."

Chris Kovalsky, Plant Engineer, Nucor Steel Birmingham

"We have selected Thermal-Tec to perform roof work at our Tennessee Aluminum Processors facility. Thermal-Tec has meet and exceeded our on site safety requirements. Work was preformed on various areas in the plant and there were no complaints or concerns for safety during the time their personal was on site. We are looking forward to working with them with all our future roofing needs."

Larry Wayne, Tennessee Aluminum Processors

"We have selected Thermal-Tec to perform roof work at our Steel Technologies, Ghent, KY facility. Thermal-Tec meets and exceeds our on-site safety requirements. Work was performed on-site, over a large area at our Steel Pickling Line, at that time there were no issues regarding safety. We would not hesitate to recommend them to anyone who may have a concern with safety."

Maintenance Manager, Steel Technologies Inc.

"Thermal-Tec has re-roofed approximately 95% of our Shelbyville Tennessee facility. Our concern for a safe and dry working environment is being resolved. We are no longer concerned about customer’s products being water stained or production being stopped or altered due to roof leaks."

Chris Presley, Imco/Aleris Recycling

"This letter is in reference to the roof work performed by Thermal-Tec. My experience is that Thermal-Tec provides outstanding safety, service and value for our roofing needs. I have been very satisfied with the safety, the service and the product’s ability to adapt to the difficult environment in which it has been installed. Thermal-Tec’s work has met and exceeded our contractor safety requirements. Their projects are performed on time and on budget. Their crews are well educated and extremely efficient throughout the entire process. Safety, productivity, and results have been the basis for our decision to use Thermal-Tec. We are pleased to recommend them."

Bill Phillips, Bermco Aluminum

"This letter is in reference to the recent roof work performed by Thermal-Tec at our casting facility in Davenport, Iowa. Thermal-Tec demonstrated outstanding safety, service and efficiency in completing this project. The project was performed according to the agreed schedule and budget proposed. Safety, productivity, and project results were the basis for our decision to uuse Thermal-Tec and would recommend them based on our experience with these areas."

"We have selected Thermal-Tec to perform roof work at our Wabash Indiana plant. Thermal-Tec has met and exceeded our on site safety requirements. Work on various areas in the plant has produced leak free results and there were no complaints or concerns for safety during the time their personal was on site. We are looking forward to working with them with all our future roofing needs."

Jim Trail,Wabash Alloys

"Crown Battery Mfg. co. has been using Thermal-Tec for over five years. In the past, we have had problems with leaking and rusting due to the use of chemicals used in our process. We have not had a roof-related safety violation or concern since the application of the MR Multi-Ply Roofing System. We are looking forward to working with Thermal-Tec now and into the future."

Robert Michael Jr, Director of Plant Engineering, Crown Battery

"We have selected Thermal-Tec to perform various roof work at our US Gypsum – Detroit plant. Thermal-Tec has met and exceeded our contractor safety requirements. Their work on various areas in the plant has produced leak free results and no complaints or concerns for safety during the time their personnel were on-site. We are looking forward to working with them soon for our future roofing needs."

Jesse Smith, Project Engineer, USG Company

"We have selected Thermal-Tec to perform roof work at our Steel Technologies facility in Portage, Indiana. Thermal-Tec has met and exceeded our on-site safety requirements. There were no complaints or concerns for safety during the time their personnel was on site. We would not hesitate to recommend them to anyone who may have a concern with safety."

Owen Compton, Steel Technologies